| Customization: | Available |
|---|---|
| Type: | Submersible |
| Contact: | Contact |
|
Still deciding? Get samples of US$ 130/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HPT604 Stainless Steel Absolute Fuel Pressure Level Sensor
Product Description
HPT604-A is a submersible level transducer suitable for liquid
level and depth measurement. It consists of an U.S.A imported GE piezoresistive sensing element encased in 316L housing. It's all stainless steel, hermetically sealed housing make it suitable for immersion in most industrial liquids and oils.
Each submersible pressure transducer features a removable nose cone at the sensor which protects the diaphragm from damage. Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer.
HPT604-A incorporates lightning and surge protection utilizing dual arrestor technology, and assures under the input and output short-circuit conditions to prevent reverse connection. It also eliminates both power supply surges and lightning ground strike transients.
You will benefit from Our HPT604 wastewater water level sensor ?
|
Advantage |
Benefit |
|
short-circuit conditions to protect prevent reverse connection; Instant voltage overload protection |
running reliable and longlasting in harsh condition |
|
breath atmospher and protect moisture enter transducer |
without maintenance, even in the most humid environments. |
|
High accuracy 0.25%,Small temperature drift,automatically compensates for changes in barometric pressure |
Stability,keep sensor running longer by reducing downtime and maintenance costs |
|
Low-power output signals for battery-operated or solar measuring systems available ,lowest power supply is 3.3V |
energy-saving and environmental protection |
|
Anti-corrision ,wear resistance , shock resistance |
make it suitable for immersion for a long time in most industrial liquids |
|
8 pore design Anti-blocking Prevent plugging rate increases more than 80% |
Simple maintenance ,easy to cleaning and installation |
1. 5-10 years design life, the lifelong maintenance; Import diffusion silicon core body, ≤1 ms response time; Its service life is 2-3 times of similar products.
2. Adopt the high quality printed-circuit board and wiring, with good electromagnetic compatibility;
Anti-interference is enhanced by 300%, the stability is over 10 years.
3. The unique design of 8 hole and The unique filter design, it Can effectively filter out impurities,prevent blockage, prevent shock; Prevent plugging rate increases more than 80%.
Specificate of Seawater level sensor
| Model | HPT604-A | ||||||
| Pressure Range | 0-0.05 Bar…..50 Bar / 0-0.5m…..500m H2O Optional | ||||||
| *1000m H2O max can be specially customized | |||||||
| * 80m max for SDI-12 signal | |||||||
| Overload | 150% F.S. | ||||||
| Burst Pressure | 500% F.S. | ||||||
| Accuracy (Linearity Hysteresis Repeatability) |
≤ ±0.5%F.S(Typical); ≤ ±0.25%F.S (by customized) @25 degree C Including non-lin., rep. and hys. Optional |
||||||
| Long-term Stability | ≤ ±0.1%F.S. of span/year | ||||||
| Working Temp. | -40ºC~80ºC(non-corrosive medium) | ||||||
| Storage Temp. | -40ºC~80ºC(Nitrile rubber sealing ring); -20ºC~80ºC(fluororubber rubber sealing ring) | ||||||
| Temperature Compensation | 0ºC~80ºC | ||||||
| Medium compatible | Compatible with 316L Stainless Steel | ||||||
| Electrical Wire | 2 Wires | 3 Wires | 4 wires | ||||
| Output | 4-20mA | 1-5V;0-5V | 0-10V | 0.5-4.5V | SDI-12 | Dual 4-20mA | RS485 Modbus RTU |
| Power Supply | 7-30Vdc | 8-30Vdc | 13-30Vdc | 5Vdc±5% | 12Vdc | 12-30VDC | 3.5-36Vdc |
| Polarity protection | Yes | Power wires-Yes; Signal Wires-Yes, Power&Signal Wires-No! | |||||
| Insulate resistance | >100M Ω@50V | ||||||
| Zero Temp. Drift | 0.2%FS/ºC(≤100kPa); 0.1%FS/ºC(>100kPa) | ||||||
| FS Temp. Drift | 0.02%FS/ºC(≤100kPa); 0.01%FS/ºC(>100kPa) | ||||||
| Electrical connection | Fixed cable with vented tube and water proof IP68 | ||||||
| Response time | ≤10 ms | ||||||
| Pressure Type | Gauge pressure; Sealed gauge and absolute optional. | ||||||
| Certificate | Exia IICT6, TUV RoHS and CE Certificate | ||||||
| EMC Standard | EN 61326-1:2013; EN 61326-2-3:2013 | ||||||
| EN 61000-6-2:2005; EN61000-6-4:2007+A1 | |||||||
| Lightning Protection (optional functions) | Air conduction more than 8000V; external sensor more than 4000 Voltage protection. | ||||||
| Cable optional | Cable materials are optional according to request, we offer 3 types of special cables as follow: | ||||||
| PE Cable(Water Proof); PU Cable(Oil/Fuel Proof); FEP Cable(Anti-Corrosive) | |||||||
Order information : Range :0-2m , Output :4-20mA , Power supply:12-30VDC ,Process connection: Filter cover ,Electronic Connector:Directly cable
How to place an order
1:How long will you give me the reply?
we will contact you in 30mins as soon as we can.
2:Could I get samples?
Price is for 5m range 420ma 5 m PE cable with vents , If you want to order other specification ,you can contacts us directly ,we will reply you 24 hours online .
3:If I have paid,when will you help me to produce?
When we have received the money in our account,we will give you the receipt and arrange to produce immediately
4:How to pay for that ?
Of We could accept T/T,Paypal,WU ,Credit Assurance.
You will get full protection for your orders ,More details Kindly click Trade Assurance
){kind=link}