| Customization: | Available |
|---|---|
| Type: | Submersible |
| Contact: | Contact |
|
Still deciding? Get samples of US$ 210/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Holykell Factory Hpt611 Anti-Clogging Submersible Type Septic Tank Level Indicator
HPT611 a fully submersible level transducer is the cost effective solution for sewage or waste water with viscous medium level measurement.It consists of the U.S.A imported GE piezoresistive sensing element encased in a 316L SS housing. Its all stainless steel, hermetically sealed housing make it suitable for immersion for a long time in most industrial sewage and waste water .
Each submersible sewage level transducer has "Steel cage" design offers the highest reliability in level measurement for severe high solids environments .The steel cage front end design allows for proper flow of liquids while keeping the sensor at the bottom of the tank or well. The "Steel cage" design gives full protection and allows sensing to sewage levels no matter how much debris/mud /sand or rags build up.
Ventilation tube in the cable automatically compensates for changes in atmospheric pressure . The vent is protected with a filter eliminating moisture in the transducer. The circuit design can the under the input and output short-circuit conditions to prevent reverse connection .
Applications
·Sewage
·Lift stations
·Storm canals
·Reservoirs / dams
·Weirs, wells, pond, reservoir, and dam
·Sludge, slurry
·For sewage water tank level
| Parameter | HPT611 Anti Clog Attachment for Submersible Liquid Level Pressure Transmitter | ||||
| Measuring Range | bar 0...10 inWC 0…1000 psi 0...150 mH2O 0...100 |
||||
| Overload | 200% F.S. | ||||
| Burst Pressure | 300% F.S. | ||||
| Accuracy (Linearity Hysteresis Repeatability) | ≤ ±0.5%F.S (typical); ≤ ±0.25%F.S (optional) @25 degree C Including non-lin., rep. and hys. Optional |
||||
| Long-term Stability | 0.1%F.S±0.05%/year | ||||
| Working Temp. | -40-80ºC(non-corrosive medium) | ||||
| Storage Temp. | -40ºC~80ºC(Nitrile rubber sealing ring); -20ºC~80ºC(fluororubber rubber sealing ring) | ||||
| Temperature Compensation | 0ºC~50ºC | ||||
| Medium compatible | Compatible with 316L Stainless Steel | ||||
| Electrical Wire | 2 Wires | 3 Wires | 4 wires | ||
| Output | 4-20mA | 0-5V | 0-10V | 0.5-4.5V | RS485 Modbus RTU |
| Power Supply | 7-30Vdc | 8-30Vdc | 13-30Vdc | 5Vdc±5% | 3.5-36Vdc |
| Insulate resistance | >100M Ω@50V | ||||
| Zero Temp. Drift | 0.5%FS/ºC(≤100kPa);0.25%FS/ºC(>100kPa) | ||||
| FS Temp. Drift | 0.02%FS/ºC(≤100kPa),0.01%FS/ºC(>100kPa) | ||||
| Electronic connection | Over molded and Fixed cable with vented tube, IP68 | ||||
| Process Connect | 90mm (3.5'') flange | ||||
| Body Diameter | 28 mm | ||||
| Material of housing | Stainless Steel | ||||
| Response time | ≤10ms | ||||
| Pressure Type | Gage pressure and absolute pressure optional | ||||
| Certificate | Exia IICT6 ,RoHS, CE Certificate | ||||
| EMC Standard | EN 61326-1:2013; EN 61326-2-3:2013 | ||||
| EN 61000-6-2:2005; EN61000-6-4:2007+A1 | |||||
| IP Rating | IP68 | ||||
){kind=link}