| Customization: | Available |
|---|---|
| Type: | Submersible |
| Contact: | Contact |
|
Still deciding? Get samples of US$ 200/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HPT607 submersible water level transmitter is designed with a slim 19mm diameter body to enable it to fit small access ports, you can use it to measure liquid level and depth for water and waste water applications, at lift stations, ship- board, in-ground / above ground tanks and with inventory tank gauging.
|
Feature |
Advantage |
Benefit |
|
Slender designed with a slim 19mm diameter body |
enable it to fit small access ports |
It is perfect for deep underground wells and boreholes |
|
All weled ,Triple waterproof IP design |
Protect sensor damage |
Improve the water resistance and service life of the product |
|
Hydrologic design |
Reduce the impact force of the medium on the probe and reduce the influence of the probe shaking |
on the measurement stability |
|
Anti - corrosive geological water materials and high quality polyethylene gas cable |
with a spring-reinforced cable seal ,5 layer reinforced process |
even under the big mechanical loads of installation and |
|
lightning surge reverse protection |
short-circuit conditions to protect prevent reverse connection; Instant voltage overload protection |
running reliable and longlasting in harsh condition |
|
The vent with a filter |
breath atmospher and protect moisture enter transducer |
without maintenance, even in the most humid environments. |
|
USA TE Chip,Digital PCB board |
High accuracy 0.25%,Small temperature drift,automatically compensates for changes in barometric pressure |
Stability,keep sensor running longer by reducing downtime and maintenance costs |
|
316L diaphragm |
Anti-corrision ,wear resistance , shock resistance |
make it suitable for immersion for a long time in most industrial liquids |
Why Choose HOLYKELL HPT607 Depth Level Sensor Seires?
1. 5-10 years design life, the lifelong maintenance; Import MEAS TE pressure cell ensure 0.25% F.S. factory accuracy;Its service life is 2-3 times of similar products.
2. Adopt the high quality printed-circuit board and wiring, with good electromagnetic compatibility;Anti-interference is enhanced by 300%, the stability is over 10 years.
3. Slender design 19mm Diameter Body fit for small access ports.
4. The unique design of 4 hole filter design, it Can effectively filter out impurities, prevent blockage, prevent shock; Prevent plugging rate increases more than 80%
5. Automatic temperature compensation, 0 ~ 70, auto correction temperature drift.
6. Five layers of seamless and waterproof dust proof connection design, international level IP68; 12 mm waterproof and oil-proof cables, Custom PU, PE or PTFE cable lengths.
The HPT607 (level sensor) is designed with a slim 19mm diameter body to enable it to fit for small access ports,is widely used in measure Liquid Level and Depth for Water and Waste Water applications, at Lift Stations, Shipboard, In-ground / Above Ground Tanks and with Inventory Tank Gauging. And are highly praised by consumers.
·Groundwater Monitoring
·Deep well and borehole measurements
·Down Hole measurement
·Surface Water Monitoring
·Control of Lift and Pumping Stations
·Level Measurement in Storm Water
·Dam's Operations
| Parameter | HPT607 | |||||
| Pressure Range | 0-0.2 Bar…..50 Bar / 0-2m...500m H2O Optional | |||||
| * 80m max for SDI-12 signal | ||||||
| Overload | 150% F.S. | |||||
| Burst Pressure | 500% F.S. | |||||
| Accuracy(Linearity Hysteresis Repeatability) | ≤ ±0.5%F.S(Typical); ≤ ±0.25%F.S(by customized) @25 degree C | |||||
| Including non-lin., rep. and hys.Optional | ||||||
| Long-term Stability | 0.1%F.S±0.05% | |||||
| Working Temp. | -40-80ºC(non-corrosive medium) | |||||
| Storage Temp. | -40ºC~80ºC(Nitrile rubber sealing ring); -20ºC~80ºC(fluororubber rubber sealing ring) | |||||
| Temp. compensation | 0ºC~50ºC | |||||
| Medium compatible | Compatible with 316L Stainless Steel | |||||
| Electrical Wire | 2 Wires | 3 Wires | 4 wires | |||
| Output | 4-20mA | 0-5V;1-5V | 0-10V | 0.5-4.5V | SDI-12 | RS485 Modbus RTU |
| Power Supply | 7-30Vdc | 8-30Vdc | 13-30Vdc | 5Vdc±5% | 12Vdc | 3.5-36Vdc |
| Life time | ≥1×108 pressure cycles | |||||
| Zero Temp. Drift | 0.2%FS/ºC(≤100kPa); 0.1%FS/ºC(>100kPa) | |||||
| FS Temp. Drift | 0.01%FS/ºC(≤100kPa); 0.005%FS/ºC(>100kPa) | |||||
| Electrical connection | Fixed cable with vented tube and water proof IP68 | |||||
| (5 layer grade seal, water proof cover+2 grade rectangular ring + O-ring seal+sealant+ encapsulating compound ) | ||||||
| Pressure mounting port | With stainless steel filter (Standard type) | |||||
| Response time | ≤10ms | |||||
| Pressure Type | Gauge pressure and absolute optional | |||||
| Certificate | CE Certificate | |||||
| EMC Standard | EN 61326-1:2013; EN 61326-2-3:2013 | |||||
| EN 61000-6-2:2005; EN61000-6-4:2007+A1 | ||||||
| Remarks | Special request by customized | |||||
Our Services
In order to recommend you the most suitable products and make an accurate quotation,please provide the following information and send it to our sales when you are going to make an inquiry, thanks !
1. What is your medium? Water ,oil or others.
2. Working Temperature? -30~80
3. Level range: 0-1m...500m optional
4. Output signal:4-20mA, 0-5V or others
){kind=link}