Type: | Submersible |
---|---|
Contact: | Contact |
Output Signal Type: | 4-20mA /1-5V/0-5V/0-10V/0.5-4.5V/SDI-12/Dual 4-20/ |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
HPT604 is a sewage water level sensor probe suitable for liquid level and depth measurement. It consists of an imported MEAS TE piezoresistive sensing element encased in 316 SS housing. And adopt the advanced printed-circuit board and wiring, with good electromagnetic compatibility;Anti-interference is enhanced by 300%, the stability is over 10 years.
You will benefit from Our HPT604 wastewater water level sensor ?
Advantage |
Benefit |
short-circuit conditions to protect prevent reverse connection; Instant voltage overload protection |
running reliable and longlasting in harsh condition |
breath atmospher and protect moisture enter transducer |
without maintenance, even in the most humid environments. |
High accuracy 0.25%,Small temperature drift,automatically compensates for changes in barometric pressure |
Stability,keep sensor running longer by reducing downtime and maintenance costs |
Low-power output signals for battery-operated or solar measuring systems available ,lowest power supply is 3.3V |
energy-saving and environmental protection |
Anti-corrision ,wear resistance , shock resistance |
make it suitable for immersion for a long time in most industrial liquids |
8 pore design Anti-blocking Prevent plugging rate increases more than 80% |
Simple maintenance ,easy to cleaning and installation |
1. 5-10 years design life, the lifelong maintenance; Import diffusion silicon core body, ≤1 ms response time; Its service life is 2-3 times of similar products.
2. Adopt the advanced printed-circuit board and wiring, with good electromagnetic compatibility;
Anti-interference is enhanced by 300%, the stability is over 10 years.
3. The unique design of 8 hole and The unique filter design, it Can effectively filter out impurities,prevent blockage, prevent shock; Prevent plugging rate increases more than 80%.
Specification of Seawater level sensor
Name |
HPT604 seawater wastewater level sensor |
|||||
Measurement Range |
0...1…500mH2O price for 5m 420ma |
|||||
Overload pressure |
1.5 times rated pressure |
|||||
Failure pressure |
3 times rated pressure |
|||||
Accuracy |
±0.15%F.S, ±0.25%F.S, ±0.5%F.S |
|||||
Stability |
Typical value: 0.1%F.S, Maximum value: 0.2%F.S |
|||||
Operation temperature |
-40~85 or -40~100(Customized) |
|||||
Compensation temperature |
-10~70 or 20~80(Customized) |
|||||
Medium compatibility |
All corrosive medium compatible with 1Cr18Ni9Ti and 316L |
|||||
Electrics feature |
Two-wire type |
Three-wire type |
Four-wire type |
|||
Signal output |
4~20mA |
0/1~5V |
0~10V |
0.5~4.5V |
0~100mV/V |
RS485/EIA485 |
Power supply |
12~36Vdc |
10~36Vdc/ac |
15~36Vdc/ac |
5Vdc |
10Vdc |
10~30Vdc |
Load resistance |
(U-10)/0.02(Ω) |
>100kΩ |
||||
Insulate |
>100MΩ@100V |
|||||
Electrics connector |
Waterproof fixed cover + bipolar cycle matrix + sealing ring |
|||||
+ sealgum + glue feed, etc,five rank sealed. |
||||||
protection rank: IP68 |
||||||
Pressure junction |
Various embedded structures suit to different applications 1/8, 1/4 or 1/2 |
|||||
Response time |
≤10 ms (standard); ≤1 ms (Customized) |
|||||
Pressure form |
Gauge pressure: G, Absolute pressure: A |
|||||
Certification |
Explosion proof certification, CE certification. Rosh certification |
Order information : Range :0-5m , Output :4-20mA , Power supply:12-30VDC ,Process connection: Filter cover ,Electronic Connector:Directly cable
Suppliers with verified business licenses